Add a touch of luxury to your outdoor living space today!
Looking to add a touch of luxury and comfort to your outdoor living space? Look no further than Bromic’s Platinum Smart-Heat Gas Outdoor Heater. These heaters are built with pure premium materials and designed with elegance, ensuring that there is no compromise on performance, reliability, or beauty.
Each heater comes with a complimentary wall mounting bracket so that it can be easily mounted on walls or structures. Ceiling poles, deflectors, and controllers can be purchased as additional accessories. To control the heater, we recommend adding the Bromic On/Off controller and wireless remote. Alternatively, the heater can also be controlled via a standard wall switch.
Please note that you can not control the heat output of the gas heater. This is only possible on our Bromic electric heaters by using a dimmer controller.
300 SERIES


Product Width: 22.1″
Product Depth: 15.9″
Product Depth (with Heat Deflector): 19.6″
Product Height: 12″
Product Height (with Heat Deflector): 13.9″
Overall Height: 16.6″
Weight: 33lb
Color Options: Black
Heat Area: 160 ft2
Fuel Type:
- Natural Gas (BH0110001-1)
- LPG (BH0110002-1)
500 SERIES


Product Width: 29.8””
Product Depth: 15.9″
Product Depth (with Heat Deflector): 19.6″
Product Height: 12″
Product Height (with Heat Deflector): 13.9″
Overall Height: 16.6″
Weight: 44lb
Color Options: Black
Heat Area: 215 ft2
Fuel Type:
- Natural Gas (BH0110003-1)
- LPG (BH0110004-1)
Bromic Platinum Smart-Heat Gas Outdoor Heater Features
Superior wind resistance – 14mph
Stainless steel trim
Distinct ceramic glass front
Liquid Propane or Natural Gas
BTUs:
- Model 300: 23,600 BTU
- Model 500: 39,800 BTU
Electronic ignition – requires 110VAC outlet
On/off operation
Wall or ceiling mount
Minimum Floor Clearance: 96″
Unit includes Wall Mount Assembly.
Pole kit required for ceiling mount – sold separately
Rated Current:
- 300 SERIES – 110V/2A
- 500 SERIES – 110V/2A

Standard Benefits
- Our heaters are made of high-quality materials and designed with elegance.
- These heaters have a sleek, modern design that will complement any outdoor living space.
- You’ll be able to enjoy your backyard all year round without having to worry about the weather.
- You’ll never again have to shiver in the cold while you’re trying to enjoy your backyard or patio.
Recommended Controls and Accessories
Gas Mounting Options:
Ceiling Mounted (Mounting Poles):
Bromic Gas Mounting Poles ensure that your gas heater will be suspended at just the right height (between 8′ and 9′), so it delivers the optimum amount of heat. Suitable for both our Tungsten and Platinum Gas Collections, the poles come in six different sizes to suit a variety of ceiling heights.

Wall Mounted (Wall Mounting Bracket):
Each of our Bromic Tungsten Gas and Platinum Gas heaters is delivered with a complimentary wall mounting bracket so that the heaters can be easily mounted on walls or structures. Please consult our installation guides to determine the exact height your heaters need to be installed at.

Control Options:
Manual Wall Switch (Basic Control)

Bromic’s Manual Wall Switches are the simple on/off solution for outdoor heating control. With indoor and covered outdoor single and double pole options, the 20 Amp, 120/277 volt manual wall switches can be placed where convenient access is needed.
–
Type: Hardwired
Use: on/off control
Ideal for: Users who just want a straightforward wall-mounted switch with no remote or smart features
Note: Available in single or dual channel depending on how many heaters you want to control
Legacy Wireless ON/OFF Controller

Bromic Heating independent ‘On/Off’ controller with wireless 4-Channel Remote can control up to two electric or four gas heaters across two separate circuits from up to 100 FT away. The wireless remote is fully portable or can be easily mounted with the included double-sided adhesive/screws.
–
Type: Wireless or Automated
Use: Wireless remote for basic on/off, or automated integration with smart home systems via RS‑232 Smart-Heat Link
Ideal for: Users with existing Bromic legacy systems or those using traditional home automation platforms
Note: Requires pairing with Bromic controller; no app, no Wi‑Fi
Affinity Smart Heat ON/OFF Controller

The Affinity Smart-Heat™ Controls pair seamlessly via Wifi, Bluetooth or optional Ethernet connection to our new Bromic Heating app, where users have complete, customizable control over their comfort in the palm of their hand.
–
Type: Smart Wi-Fi + Bluetooth controller
Use: App control, scheduling, zone management, voice assistants (Alexa, Google)
Installation: Requires wiring and app setup
Ideal for: Tech-savvy users or homeowners with modern smart homes
Note: Can control up to 10 gas heaters per channel
Platinum Smart-Heat Gas
Specifications
![]()
Installation/User Manual
![]()
Installation must be carried out by a licensed and authorized technician in accordance with local building codes. Please refer to our clearance requirements and consult the installation manual for further details.











































Reviews
There are no reviews yet.